• Over 46 million magnets in stock
  • Around 250 000 orders per year
The product was added to your shopping cart.
Go to shopping cart

Neodymium magnet system Ø 88 mm white rubber-coated with screw socket, holds approx. 56 kg

thread M8


Item number TCNGW-88
Strength approx. 56 kg
Displacement force approx. 17 kg
Unit of Sale 1 piece
Price and rebate
1 pc. 15,47 EUR ea.
from 3 pcs. 13,95 EUR ea.
from 10 pcs. 12,61 EUR ea.
from 20 pcs. 11,95 EUR ea.
from 40 pcs. 11,37 EUR ea.
Ask for a rebate from 140 pcs.
incl. VAT plus shipping

15,47 EUR

incl. VAT plus shipping

promptly deliverable

Available: 414 pieces

Delivery time: 2-9 business days

Quant.

Description

These neodymium magnet systems have a screw socket into which you can screw hooks, eyelets etc. The white rubber coating protects delicate surfaces from scratches and at the same time increases the load capacity in shear direction. The rubber protects the magnet from occasional moisture and splashes. Permanent outdoor use, however, may lead to the formation of rust. Our ferrite pot magnets, on the other hand, are rust-proof.

Compared to standard pot magnets without a rubber coating, these rubberised magnet systems are thinner and more discreet. There is a steel plate under the white rubber coating with 12 embedded magnets. They are arranged alternately with north and south pole facing up. As a result, you will be able to combine these magnet systems with each other. But please be careful, because once two of these magnet systems are fully joined, it will be very difficult to separate them again.

Please note:
Carefully tighten the screws, hooks, etc. inside the screw socket only as far as they will go.

If you want to reposition the magnet system, please do not attempt to remove it by dragging it along the mounting surface. This will damage the rubber coating. Instead, remove the magnet by tilting it with the help of a plastic handle. You can find a suitable handle for this magnet system linked below.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the magnet system makes direct and complete flush contact. Magnet systems already start to lose part of their adhesive force at a small distance from the ferromagnetic surface. This characteristic is more pronounced in magnet systems than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about magnet system characteristics.

Technical data

Article ID TCNGW-88
EAN 7640172692196
Material NdFeB
Strength approx. 56 kg (approx. 549 N)
Displacement force approx. 17 kg (approx. 165 N )
Diameter D 88 mm
Neck diameter d1 12 mm
Height H1 8,5 mm
Total height H2 17 mm
Thread size M8
Tolerance +/- 0,5 mm
Covering Rubber (TPV)
Colour White - double
Magnetisation N38
Max. working temperature 80 °C
Shape Disc
Design With screw socket
Weight 190 g

The structure of magnet systems


In magnet systems, one or several magnets are mounted on a steel plate with alternating poles. This concentrates the adhesive force of the magnets on one side of the system which, in turn, has a positive effect on the adhesive force. The steel plate with the magnets is encased in rubber. For more information, please refer to our FAQ page on the characteristics of magnet systems.

Recommended accessories for this product

Load...
screw hooks 22 mm inner diameter, steel, nickel-coated, thread M8
10 pcs. 0,89 EUR ea.*
Available: 38 200 pcs.
1 pc. 6,15 EUR ea.*
from 3 pcs. 5,74 EUR ea.*
from 10 pcs. 4,83 EUR ea.*
Available: 439 pcs.
made of steel C15, zinc-plated
1 pc. 2,97 EUR ea.*
Available: 252 pcs.
eyelet bolt 23 mm inner diameter, steel, nickel-coated, thread M8
10 pcs. 1,12 EUR ea.*
Available: 8 230 pcs.