• Customer service in 3 languages
  • Over 46 million magnets in stock
The product was added to your shopping cart.
Go to shopping cart

Neodymium magnet system Ø 22 mm white rubber-coated with internal thread, holds approx. 5,9 kg

thread M4


Item number ITNGW-22
Strength approx. 5,9 kg
Displacement force approx. 1,8 kg
Unit of Sale 1 piece
Price and rebate
1 pc. 4,47 EUR ea.
from 3 pcs. 3,89 EUR ea.
from 10 pcs. 3,37 EUR ea.
from 20 pcs. 3,12 EUR ea.
from 40 pcs. 2,90 EUR ea.
Ask for a rebate from 180 pcs.
incl. VAT plus shipping

4,47 EUR

incl. VAT plus shipping

promptly deliverable

Available: 3 825 pieces

Delivery time: 2-9 business days

Quant.

Description

This neodymium magnet system has a metric internal thread and can be screwed together with objects having a suitable external thread. The white rubber coating protects delicate surfaces from scratches and, at the same time, increases the load capacity in shear direction. The rubber protects the magnet from occasional moisture and splashes. Permanent outdoor use, however, may lead to the formation of rust. Our ferrite pot magnets, on the other hand, are rust-proof.

Compared to standard pot magnets without a rubber coating, this rubberised magnet system is thinner and more discreet. There is a steel plate under the white rubber coating with an embedded magnet that has a multipolar magnetisation. As a result, you will be able to combine these magnet systems with each other. But please be careful, because once two of these magnet systems are fully joined, it will be very difficult to separate them again.

Please note: This magnet system has a full-length internal thread, requiring extra care when threading screws, hooks and the like to prevent damage to the rubber coating.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the magnet system makes direct and complete flush contact. Magnet systems already start to lose part of their adhesive force at a small distance from the ferromagnetic surface. This characteristic is more pronounced in magnet systems than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about magnet system characteristics.

Technical data

Article ID ITNGW-22
EAN 7640172692202
Material NdFeB
Strength approx. 5,9 kg (approx. 57,9 N)
Displacement force approx. 1,8 kg (approx. 17,4 N )
Diameter D 22 mm
Height H 6 mm
Thread size M4
Tolerance +/- 0,5 mm
Covering Rubber (TPV)
Colour White - double
Magnetisation N42
Max. working temperature 80 °C
Shape Disc
Design With internal thread
Weight 10 g
PDF data sheet

The structure of magnet systems


In magnet systems, one or several magnets are mounted on a steel plate with alternating poles. This concentrates the adhesive force of the magnets on one side of the system which, in turn, has a positive effect on the adhesive force. The steel plate with the magnets is encased in rubber. For more information, please refer to our FAQ page on the characteristics of magnet systems.

Recommended accessories for this product

Load...
100 pcs. 0,08 EUR ea.*
Available: 3 600 pcs.
made of stainless steel, screw-mounted
10 pcs. 1,68 EUR ea.*
Available: 3 890 pcs.
made of galvanised steel
25 pcs. 1,03 EUR ea.*
Available: 425 pcs.
made of non-ferromagnetic stainless steel
10 pcs. 0,10 EUR ea.*
Available: 7 790 pcs.
metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!
10 pcs. 0,38 EUR ea.*
from 40 pcs. 0,33 EUR ea.*
from 80 pcs. 0,30 EUR ea.*
from 160 pcs. 0,28 EUR ea.*
Ask for a rebate from 2 500 pcs.
Available: 8 100 pcs.

You might also like this